Bootleg Games Central Forum
Pirate Discussion => Famicom/NES => Famicom/NES dumps => Topic started by: Jitterdoomer on September 22, 2012, 04:11:36 PM
-
Does anyone know where to find the ROM called Lethal Weapon? It is actually an NES unlicensed port of Lethal Enforcers for the arcade (not the existing sidescroller by Ocean)
-
http://www.mediafire.com/?q04heql4tldqqjt (http://www.mediafire.com/?q04heql4tldqqjt)
This was hard to find, it isn't even uploaded as a single dump elsewhere.
-
Is anyone using a mouse for this game instead of Joystick? :D
-
Necrobump here I know, sorry. Does anyone know what mapper this is using and\or if it's had any sort of mapper hack to something common like in the 8 years since this thread was last active? NESmapperProgram can't recognize it and thinks it's Mapper 0 NROM but clearly its not. Was really hoping for a mapper 1 or 4 conversion to play on real hardware.
-
Does anyone know what mapper this is using
https://wiki.nesdev.com/w/index.php/NES_2.0_Mapper_298
if it's had any sort of mapper hack to something common like in the 8 years since this thread was last active?
I can make a mapper 25 hack, which should run on common flashcarts.
-
Does anyone know what mapper this is using
https://wiki.nesdev.com/w/index.php/NES_2.0_Mapper_298
if it's had any sort of mapper hack to something common like in the 8 years since this thread was last active?
I can make a mapper 25 hack, which should run on common flashcarts.
Any chance of mapper 1 or mapper 4 if I say pretty please? I don't own any flash carts. Just a couple multicarts and I fill in the blanks with one offs I build for myself.
EDIT: I'm hoping for mapper 1 or mapper 4 cause MMC1 and MMC3 are so much easier boards to find for me personally.
EDIT #2: Mapper 25 is Konami VRC4b & VRC4d So I could use Ninja Turtles (j) or Gardius 2 (j) for use on real hardware correct? Would still be a lot easier for me to work from an MMC1 or MMC3 hack but I have no idea which it's closer to or if that is even possible. The mention of Mapper 25 lends to it being closer to MMC5 right? I say that as bio miricle baby upa was a VRC mapper game and it was converted to MMC5.
EDIT#3: Funny I'm still listed as a noob member but I've been here off and on for 7 years! lol
-
MMC1 is completely out of the question, because the game requires an IRQ counter that the MMC1 does not possess.
MMC3 might be possible, but requires a great deal of hacking.
Attached find my mapper hack for mapper 25.
The "newbie" grade probably depends on your post count, not how long you have been registered.
-
MMC1 is completely out of the question, because the game requires an IRQ counter that the MMC1 does not possess.
MMC3 might be possible, but requires a great deal of hacking.
Attached find my mapper hack for mapper 25.
The "newbie" grade probably depends on your post count, not how long you have been registered.
Thanks! I'll see about grabbing a VRC4 pcb to try this out :)
Racer Mini Yonku is actually much cheaper to get ahold of versus Gradius 2 or Ninja Turtles and I think I might
be able to get one from a seller close to me. It's VRC4 and has 128k PRG and CHR so it should work with your
mapper 25 hack you just posted correct?
http://bootgod.dyndns.org:7777/profile.php?id=1570
Again, thanks so much for your help. You are very kind.